If you want to prevent your Samsung fridge from leaking you are in the right place As we stepped into the summer season, ice maker becomes a basic necessity to enjoy cold beverages. But what to do if your ice maker stopped working? Well, if it happens don’t rush immediately to a repairman. Sometimes a quick KitchenAid refrigerator ice maker reset or troubleshoot tips can resolve the issue.
In rare cases, your ice maker that is not functioning properly needs a professional part replacement. However, most of the time some quick adjustments and KitchenAid refrigerator troubleshooting tips can bring back your ice maker into its normal function.
In this article, I have highlighted some simple DIY troubleshooting tips that will not only save your money but also your time. Utilize these tips to identify and resolve the problem yourself. Moreover, this article also covers how to reset the KitchenAid refrigerator ice maker.
KitchenAid Refrigerator Ice Maker Reset Steps
Well if your ice maker is not functioning properly, first do a quick KitchenAid refrigerator ice maker reset.
Step 1: First of all make sure that the manual switch present on the ice maker is turned on.
Step 2: Now tap the plastic tab present on the door jamb. This signals the light in the fridge to turn off.
Step 3: Shut the freezer door and give it about 10 sec to reset before opening the door.
Step 4: After that press the door switch 3 times and close the door. Leave it for few seconds to allow the ice maker to reset.
Wondering how long should a refrigerator run? Read here!
KitchenAid Undercounter Ice Maker Reset
You can easily reset your KitchenAid under-counter ice maker by following the simple steps.
Step 1: First of all turn the freezer off and wait for at least 5 min.
Step 2: When the freezer restarts, press the “Service” button to allow the ice maker to restart ice production.
KitchenAid Ice Maker Troubleshooting Tips
In case, if your ice maker is not functioning properly check out this troubleshooting guide to identify some common problems and to see if you can fix it yourself or you need some professional help.
1. KitchenAid Ice Maker is Turned Off:
First, make certain that your ice maker is turned on. As different refrigerator models have their ice maker on/off button at different places, locate the switch and check if it is on. Some ice makers have their on/off button at the top right side of their freezer.
However, for those KitchenAid Ice Makers which do not possess any on/off button; there is a wire shutoff arm present on the top of the freezer to turn it on and off.
On the other hand, if your ice maker is turned on but not connected to the water supply line; it can lead to many problems. Like buzzing sound from the ice maker, too cold refrigerator section and frozen food in the crisper drawers, etc.
2. KitchenAid Freezer Temperature Issue:
A common cause for your KitchenAid ice maker not working properly is that either the freezer temperature is too high or too low.
If the freezer temperature is too low e.g. below 0°F; it will cause the ejection components to freeze thus causing trouble in dispensing the ice cubes. Conversely, if the temperature is too high e.g. above 100°F; it will cause deficient ice production.
In addition, if the temperature is high make sure that the condenser coils are clean and the condenser fan is functioning efficiently.
Hence, to function properly your ice maker should be set within a particular temperature range. The temperature should always be between 0-5°F ((-18 to -15°C).
Also, check the evaporator coils if they are covered with frost. If so then there are chances that the defrost system parts have failed.
3. KitchenAid Ice Maker Water Supply Issue:
When the KitchenAid ice maker is not filled with sufficient water either it will be unable to produce ice or will make deficient, malformed cubes. Usually, there is an issue in the water supply system when your ice maker does not fill adequately.
Following are the issues that can affect an ice maker’s water supply system.
Defective Water Inlet Valve:
If your KitchenAid ice maker is not making ice, it might be due to a defective water inlet valve.
The water inlet valve is an electrically managed valve that is responsible for supplying the water to the ice maker and dispenser. Hence if the valve is out of order or has inadequate water pressure, it will restrain the water to flow through it.
For optimal function, the water inlet valve needs at least 20 psi pressure. So, ensure that the water inlet valve is getting a water pressure of at least 20 psi.
However, if the water pressure is adequate check the power of the water inlet valve with the help of a multimeter. In case, if it is defective you need to replace it.
Ice Maker’s Clogged Water Filter:
If the water filter is clogged with debris or minerals, it will restrain the water supply to the ice maker thus reducing the ice production. So, if you haven’t replaced your water filter for the last six months; there are chances that your filter might have been blocked.
Therefore, to prevent clogs it is recommended to change the water filter after every 6 months. Moreover, you can change it more frequently if the ice cubes start to taste bad.
Ice Maker’s Kinked Water Line:
Look for the kinks in the water line as they can also limit the water flow thus decreasing the ice production. So if possible, gently unkink the water line. However, you need to replace the water line if it is damaged.
Ice Maker’s Frozen Water Line:
Sometimes the residual water present in the water line can freeze thus causing a blockage and restricting the water supply to the ice maker. Therefore, a hairdryer can be used to melt the blockage and allow the water to flow.
Nonetheless, keeping the freezer temperature within the particular range can lessen the chances of the water line getting frozen. Defective Ice Maker’s Module:
Your KitchenAid ice maker won’t generate or dispense ice in the presence of a defective icemaker module. Also, if the ice maker module contains ejector blades; don’t forget to make sure that the ice cubes are not trapped in the blades.
Furthermore, many test points are present in the module that a professional technician can check to identify the issue.
4. Defective Ice Maker Assembly:
If your ice maker isn’t functioning properly, there are chances that one of the ice maker’s assembly components is out of order. Since not every ice maker’s component is sold individually, you may have to buy the entire ice maker assembly.
In addition, check the water line, water inlet valve, and fan before changing the ice maker assembly. In case if these parts are fine but the temperature of the freezer is 15°F, change the ice maker assembly.
5. Defective Ice Maker Mold Thermostat:
Ice maker mold thermostat is responsible for monitoring the temperature of ice mold. Once the mold thermostat attains a particular temperature, the ice maker emits the cubes and refills the mold with water. Hence, ice production will be stopped in the presence of a defective mold thermostat.
Therefore to identify the faulty thermostat, use a multimeter to check continuity. Replace the thermostat if it doesn’t have any continuity.
Conclusion:
To conclude, with the help of these easy-to-follow troubleshooting tips you can easily bring back your ice maker into its normal function. Surprisingly, sometimes all you need is to follow some simple KitchenAid refrigerator ice maker reset steps to resolve the issue.
Hurry up, follow these tips to enjoy cold drinks and iced cocktails in these hot summers.
Furthermore, to get some more information check the link below
https://www.accessengineeringlibrary.com/content/book/9780071770187
You may also find this video helpful
Contents
Leave a Reply